Chapter
26Customizing the initial settings
Using the initial settings, you can customize various system settings to achieve optimal per- formance from this navigation system.
Displaying the
“Initial Setting” screen
To customize the initial settings, display the “Initial Setting” screen.
1Press SRC/OFF and hold until the audio source turns off.
=For details, refer to Switching the audio op- eration screen on page 69.
2Press the center of
1Screen title
2Setting item
3Setting value
Setting the illumination color
The illumination color can be selected from 10 different colors. Furthermore, the illumination color can switched between these 10 colors in order.
1Display the “Initial Setting” screen.
=For details, refer to Displaying the
“Initial Setting” screen on this page.
2Turn
3Press
White (white) — Light Green (light green) — Green (green) — Light Blue (light blue) — Blue (blue) — Yellow (yellow) — Amber (amber) — Red (red) — Scan (scan) — Cus- tom (custom)
!“Scan”:
Shifts between the eight default colors in sequence gradually.
!“Custom”:
Sets your created color which is installed from SD as the illumination color.
Switching the auxiliary setting
It is possible to use auxiliary equipment with the navigation system as the one of sources. Activate the auxiliary setting when using aux- iliary equipment connected to the navigation system.
1Display the “Initial Setting” screen.
=For details, refer to Displaying the
“Initial Setting” screen on this page.
2Turn
3Press the center of
Setting the rear output and subwoofer controller
The navigation system’s rear output can be used for a
Initially, the navigation system is set for a rear
(Rear SP:F.Range).
104 En