| Chapter |
Setting a route to your destination | 06 |
|
|
Avoid Freeway
This setting controls whether freeways may be included in the route calculation.
[Off]*:
Calculate a route that may include freeways.
[On]:
Calculate a route that avoids freeways.
pThe system may calculate a route that in- cludes freeway even if [On] is selected.
Time restrictions
This setting controls whether streets or bridges have traffic restrictions during a cer- tain time should be taken into account.
pIf you want to set your route to avoid opened bridges, select [On].
[On]*:
Calculate a route while avoiding streets or bridges with traffic restrictions during a cer- tain time.
[Off]:
Calculate a route while ignoring traffic restric- tions.
pThe system may calculate a route that in- cludes streets or bridges that are subject to traffic restrictions during a certain time even if [On] is selected.
CAUTION
If the time difference is not set correctly, the navi- gation system cannot consider traffic regulations correctly. Set the time difference correctly (= Refer to Setting the time difference on page 60).
Checking the current itinerary
You can check the route details.
%Touch [Profile] on the “Route confirma- tion screen”.
The “Route Profile” screen appears.
pWhen a long distance route is calculated, your navigation system may not be able to list all roads. (In this case, the remaining roads will be shown in the list as you drive on.)
Adding a waypoint
Up to 5 waypoints can be set, and waypoints and final destination can be sorted automati- cally or manually.
pWhen you set waypoints in the route to your destination, the route up to the next
waypoint will appear in light green. The rest of the route will appear in light blue.
=For details concerning operations, refer to Adding a waypoint on page 33.
1Touch [Waypoints] on the “Route con- firmation screen”.
The “Waypoints List” screen appears.
2 Touch [Add].
The “Select Search method” screen appears.
Setting a route to your destination
En 
31
