Pioneer AVIC-U310BT Setting the rear output, Switching the sound muting/attenuation

	Chapter
Customizing the initial settings	26

1Display the “Initial Setting” screen.

=For details, refer to Displaying the

“Initial Setting” screen on the previous page.

2Turn MULTI-CONTROL to select “S/W Control”.

3Press the center of MULTI-CONTROL to switch between “Rear SP:F.Range” and “Rear SP:S/W”.

When no subwoofer is connected to the rear output, select Rear SP:F.Range.

When a subwoofer is connected to the rear output, select Rear SP:S/W.

p Both rear speaker leads output and RCA rear output are switched simultaneously in this setting. (When you use the product

without RCA rear output, this setting only applies to the rear speaker leads.)

Setting the rear output

1Display the “Initial Setting” screen.

=For details, refer to Displaying the

“Initial Setting” screen on the previous page.

1Display the “Initial Setting” screen.

=For details, refer to Displaying the

“Initial Setting” screen on the previous page.

2Turn MULTI-CONTROL to select

“Guidance”.

3Press the center of MULTI-CONTROL re- peatedly until the desired setting appears in the display.

Each press of MULTI-CONTROL changes the settings as follows:

!“ATT”:

The audio source is attenuated automati- cally when the voice guidance is output.

!“Mute”:

The audio source is muted automatically when the voice guidance is output.

!“Normal”:

The audio source volume does not change.

pOperation returns to normal when the cor- respond action is ended.

Customizing the initial settings

2Turn MULTI-CONTROL to select “Pre- out”.

3Press the center of MULTI-CONTROL to

switch between “Subwoofer” and “Rear”.

Switching the sound muting/attenuation

You can select the muting method when the voice guidance is output.

pWhen you use a cellular phone connected with Bluetooth technology (dialing, talking, incoming call), the audio source volume is always muted independently of this setting.

En 105