Setting a route to your destination

	Chapter
Setting a route to your destination	06

CAUTION

For safety reasons, these route-setting functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route.

pSome information regarding traffic regula- tions depends on the time when the route calculation is performed. Thus, the infor- mation may not correspond with a certain traffic regulation when your vehicle actually passes through the location in question. Also, the information on the traffic regula- tions provided will be for a passenger vehi- cle, and not for a truck or other delivery vehicles. Always follow the actual traffic regulations when driving.

The basic flow of creating your route

1Park your vehicle in a safe place, and apply the parking brake.

2Display the “Navigation Menu” screen.

3Select the method of searching for your destination.

=For details, refer to Searching for and select- ing a location on page 36.

4Enter the information about your desti- nation to calculate route.

5Confirm the location on the map.

=For details, refer to Checking the location on the map on this page.

6The navigation system calculates the route to your destination, and then shows the route on the map.

7Check and decide the route.

=For details, refer to Checking the calculated route on this page.

8Your navigation system sets the route to your destination, and the map of your surroundings appears.

9After releasing the parking brake, drive in accordance with navigation guidance.

Checking the location on the map

After searching for the destination, the “Loca- tion confirmation screen” appears.

Location confirmation screen

%Touch [OK].

The destination is set, and then route calcula- tion starts.

pIf you press MODE button during route cal- culation, the calculation is canceled and the map display appears.

#Touch [Scroll].

The map display changes to the scroll mode. You can fine-tune the location in the scroll mode, and then you can set the location as your destination or do various operations.

=For details, refer to Registering a location by scroll mode on page 42.

#Touch [Waypoint].

The location is added to the “Waypoints List” screen.

pIf a destination is not set, [Waypoint] is not available.

Checking the calculated route

After the destination is set, route calculation starts.