Pioneer AVIC-U310BT Using the radio FM, Operating by hardware, buttons, Reading the screen

Chapter
14		Using the radio (FM)
	You can listen to the radio by using the naviga-			Operating by hardware
	tion system. This section describes operations			buttons
	for radio (FM).
%		Press SRC/OFF button to display the		Pressing BAND/ESC button
				Band can be selected from among FM1, FM2,
	“TUNER” screen.
				FM3, or AM.
		= For details, refer to Switching the audio op-
			eration screen on page 69.	Pressing MULTI-CONTROL up or down
				You can recall radio stations assigned to pre-
	Reading the screen			set tuning keys to .
				Pressing MULTI-CONTROL left or right
				The frequencies move up or down step by
				step.
				Pressing and holding MULTI-CONTROL
				left or right
				The tuner will scan the frequencies until a
				broadcast strong enough for good reception is
				found.
				p You can cancel seek tuning by pressing
				MULTI-CONTROL left or right.
				Pressing the center of MULTI-CONTROL
1		Source icon		The function select screen appears.
		Shows which source has been selected.
	2 Band			Storing and recalling
		Shows which band the radio is tuned to: FM1
		to FM3.		broadcast frequencies
	3 Preset number indicated next to “P.CH”			With a touch of any of the preset tuning keys
		Shows what preset item has been selected.
				( to ), you can easily store up to six broad-
4		Frequency
				cast frequencies for later recall (also with the
5		Signal level indicator
				touch of a key).
6		Touch panel keys
			to :	1 When you find a frequency that you
		Recalls radio stations.
				want to store in memory, keep touching a
		= For details, refer to Storing and recalling
				preset tuning key to until the preset
			broadcast frequencies on this page.
				number (e.g., P.CH1) stops flashing.
	7 Local indicator
				The selected radio station has been stored in
		Shows when local seek tuning is on.
				memory.
		= For details, refer to Tuning in strong sig-		p Up to 18 stations, 6 for each of three FM

nals on the next page. bands can be stored in memory.

8STEREO indicator

Shows when the selected frequency is being	2 Touch the same preset tuning key to
broadcast in stereo.	.
	The radio station frequencies are recalled from
	memory.

72 En