| Chapter |
Using | 10 |
|
|
Dialing a facility’s phone number
You can make a call to facilities with phone number data.
pYou cannot make a call to locations or POIs that have no phone number data.
1Display the “Navigation Menu” screen.
2Touch [POI].
The “POI Search” screen appears.
3 Search for the POI.
The “POI List” screen appears.
=For details concerning operations, refer to Searching for Points of Interest (POI) on page 38.
4Touch 
next to the POI that you want to make a call.
The “Detailed POI Information” screen ap- pears.
5Touch 
to make a call.
To cancel the call after the system starts dial- ing, touch 
.
6 Touch 
to end the call.
Dialing from the map
You can make a call by selecting the icon of a registered location or a POI icon from the map screen.
pYou cannot make a call to locations or POIs that have no phone number data.
1Scroll the map, and place the cursor on an icon on the map.
2Touch 
.
Detailed information is displayed.
3 Touch 
to make a call.
To cancel the call after the system starts dial- ing, touch 
.
4 Touch 
to end the call.
Receiving a phone call
You can perform
Answering an incoming call
The system informs you that it is receiving a call by displaying a message and producing a ring sound once.
If [Auto Answer Preference] is set to [Off], answer the call manually. Answering is avail- able if any screen is displayed, such as the map screen or the setting screen.
pYou can set this navigation system to auto- matically answer incoming calls.
=For details, refer to Answering a call automatically on page 56.
1When a call comes in, the answering operation menu appears on the screen.
pThe registered name appears if the phone number of the received call is already regis- tered in “Contacts”.
pDepending on the caller ID service, the phone number of the received call may not be displayed. “Unknown” appears instead.
2 To answer an incoming call, touch 
.
When there is an incoming call, you can reject it by touching 
.
Using
En 
53
