| Chapter |
Using an iPod | 20 |
|
|
2Turn
3Press the center of
set.
Each press of
!“Repeat All”:
Repeats all songs in the selected list.
!“Repeat One”:
Repeats just the current song.
pIcons below are displayed as the repeat play indicator.
When the setting is “Repeat All”, ap- pears.
When the setting is “Repeat One”, ap- pears.
Playback and Pause
1Display the “Function Menu” screen.
=For details, refer to Screen switching over- view on page 70.
2Turn
3Press the center of
set.
4Press the center of
!:
Sets to S.Rtrv2.
!No indicator: Sets to off.
pS.Rtrv2 is more effective than S.Rtrv1.
Operating this navigation system's iPod function from your iPod
This navigation system’s iPod function can be operated from your iPod. Sound can be heard from the car’s speakers, and operation can be conducted from your iPod.
While the control mode is set to iPod (), you can operate iPod function from the connected iPod.
This function can be operated with the follow- ing iPod models:
!iPod nano second generation
!iPod nano third generation
!iPod nano fourth generation
!iPod classic
!iPod touch first generation
!iPod touch second generation
!iPhone
!iPhone 3G
pWhile this function is in use, even if the ignition key is turned off, the iPod will not be turned off. To turn off power, operate the iPod.
Using an iPod
Using advanced sound retriever
Advanced sound retriever function automati- cally enhances compressed audio and re- stores rich sound.
%Touch [S. Rtrv] repeatedly to select the desired setting.
Each touch of [S. Rtrv] changes the settings
as follows:
!:
Sets to S.Rtrv1.
1Touch Ctrl to switch the control mode.
Each touch of Ctrl changes the settings as
follows:
!:
This navigation system’s iPod function can be operated from the connected iPod.
!No indicator:
This navigation system’s iPod function can be operated from this navigation system.
En 91