Chapter
06
Setting a route to your destination
When the route calculation is completed, “Route confirmation screen” appears.
Route confirmation screen
1 2 3 4
1Distance to the destination
2Travel time to your destination
3Estimate the fuel cost to your destination
=For details, refer to Inputting the fuel consumption information for calculating the fuel cost on page 62.
4Route calculation condition
%Touch [OK].
Sets the displayed route as your route, and starts the route guidance.
#Touch 
.
The message confirming whether to cancel the calculated route appears.
Touch [Yes] to cancel the calculated route, and then the map screen appears.
Modifying the route calculation conditions
You can modify the conditions for route calcu- lation and recalculate the current route.
1Touch [Options] on the “Route confir- mation screen”.
The “Route Options” screen appears.
2Touch the desired items to change the route calculation conditions and then touch [OK].
The route is recalculated, and “Route confir- mation screen” appears.
Items that users can operate
Settings marked with an asterisk (*) show that these are default or factory settings.
Route Condition
This setting controls how the route should be calculated by taking into account the time or the distance or the main road.
Determines which condition takes priority for route calculation.
[Fast]*:
Calculates a route with the shortest travel time to your destination as a priority.
[Short]:
Calculates a route with the shortest distance to your destination as a priority.
[Major]:
Calculate a route that passes major arterial road as a priority.
Avoid Toll Road
This setting controls whether toll roads (in- cluding toll areas) should be taken into ac- count.
[Off]*:
Calculate a route that may include toll roads (including toll areas).
[On]:
Calculate a route that avoids toll roads (includ- ing toll areas).
pThe system may calculate a route that in- cludes toll road even if [On] is selected.
Avoid Ferry
This setting controls whether ferry crossings should be taken into account.
[Off]*:
Calculate a route that may include ferries.
[On]:
Calculate a route that avoids ferries.
pThe system may calculate a route that in- cludes ferry way even if [On] is selected.
30
En
