| Chapter |
Using the SIRIUS tuner | 22 |
|
|
=For details, refer to Using the “Instant Replay” function on the next page.
5Touch panel keys
to :
Recalls channels from the preset.
= For details, refer to Storing and recalling
broadcast stations on this page.
:
Playback and Pause
=For details, refer to Using the “Instant Replay” function on the next page.
:
Changes the display in the text area.
Each touch of changes the display infor- mation.
pTouching and holding scrolls dis-
played information.
:
Switching the SIRIUS channel select mode.
=For details, refer to Switching the SIRIUS channel select mode on this page.
Operating by hardware buttons
Pressing BAND/ESC button
Band can be selected from among SR1, SR2, or SR3. This is useful for switching the preset item.
Pressing and holding
You can skip the broadcasting channels.
Pressing the center of
Storing and recalling broadcast stations
With a touch of any of the preset tuning keys ( to ), you can easily store up to six broad- cast channels for later recall (also with the touch of a key).
1Select the channel that you want to store in memory.
2Keep touching a preset tuning key to until the SIRIUS preset number (e.g., P.CH1) stops flashing.
The selected station has been stored in mem- ory.
p Up to 18 stations, 6 for each of three SIRIUS bands can be stored in memory.
3Touch the same preset tuning key to
.
The station is recalled from memory.
p You can also press
Using the SIRIUS tuner
Pressing
You can recall radio stations assigned to pre- set tuning keys to .
During Category mode:
The categories move up or down one at a time.
Pressing
The channels move up or down one at a time. During Category mode:
The channels move up or down one at a time within a selected category.
preset tuning keys to .
Switching the SIRIUS channel select mode
You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.
%Touch repeatedly to set the desired channel select mode.
It changes the settings as follows:
En 97