Checking and modifying the current route
Chapter
07
=For details concerning operations, refer to
Modifying the route calculation conditions on page 30.
Using the demonstration guidance
This is a demonstration function for retail stores. After a route is set, touching this key starts the simulation of route guidance.
1Display the “Navigation Menu” screen.
2Touch [Settings].
The “Settings Menu” screen appears.
3 Touch [Demo Mode].
Each time you touch the key changes that set- ting.
![On]:
Repeat demo drive.
![Off] (default):
Demo Mode is set off.
2 Touch [Cancel].
A message confirming the cancellation of the current route appears.
3 Touch [Yes].
The current route is deleted, and a map of your surroundings reappears.
#Touch [Skip].
The next waypoint along the route can be skipped.
A new route to your destination through all re- maining waypoints, except for the skipped way- point, is calculated.
When the route calculation is completed, “Route confirmation screen” appears.
p[Skip] is available only when a waypoint is set.
#Touch [No].
Returns to the previous display without deleting the route.
Checking and modifying the current route
Canceling the route guidance
If you no longer need to travel to your destina- tion, follow the steps below to cancel the route guidance.
1 Display the “Navigation Menu” screen.
En 35