Epson 4100 manual IBM Proprinter Control Commands, Set/Cancel NLQ

250	IBM Proprinter Control Commands
	ESC I			Set/Cancel NLQ
	ASCII:	ESC	I	(n)
	Control:	CTRL [	I	(n)
	Decimal:	27	73	(n)
	Hexadecimal:	1B	49	(n)

Sets and cancels near letter quality (NLQ) print. n specifies whether NLQ printing is set or cancelled as follows:

•n = 1 or 4: Cancel NLQ

•n = 2 or 6: Set NLQ

Note: Near letter quality printing is available only in 10, 12, and 15 pitch.

ESC G		Set NLQ
ASCII:	ESC	G
Control:	CTRL [	G
Decimal:	27	71
Hexadecimal: 1B		47

Starts near letter quality (NLQ) printing.

Note: Near letter quality printing is available only in 10, 12, and 15 pitch.

ESC H		Cancel NLQ
ASCII:	ESC	H
Control:	CTRL [	H
Decimal:	27	72
Hexadecimal: 1B		48

Cancels near letter quality (NLQ) printing set with ESC G.

ESC E		Emphasized Mode (Bold Strike), ON
ASCII:	ESC	E
Control:	CTRL [	E
Decimal:	27	69
Hexadecimal: 1B		45

Begins emphasized printing. All characters following this command are printed in bold strike. See BASIC example under ESC F.