Epson 4100 manual Lines/Inch, Form Length

72 Configuration

Lines/Inch

Pressing YES prints out the active line space setting:

•6 lpi (factory default)

•8 lpi

This sets the number of lines per vertical inch. For an 11 in. form, the printer prints a maximum of 66 lines at 6 lpi or 88 at 8 lpi.

Form Length

Pressing YES prints out the active form length setting:

•0.5 in. to 31.5 in. in .5 in. increments (11 in. is factory default)

•112/3 in. (standard A4 length for continuous forms)

•420.0 mm

•297.0 mm

•210 mm

•148.5 mm

Normally, the form length is the vertical distance between horizontal perforations. However, any evenly divisible or multiple of this length to the half inch can be used. For example, if you print on fanfolded 1½ in. label stock, you might want to set the form length to 1½ in. rather than the actual distance between horizontal perforations.*

*12 in. is a standard vertical distance between horizontal perforations on some fanfolded label stock.