Epson 4100 manual REM SET Vertical Tabs to Lines 5

				Operator’s Guide 255
ESC B				Set Multiple Vertical Tabs
ASCII:	ESC	B	(n1)...(n16)	NUL
Control:	CTRL [	B	(n1)...(n16)	CTRL @
Decimal:	27	66	(n1)...(n16)	0
Hexadecimal:	1B	42	(n1)...(n16)	00

Sets vertical tabs to the specified lines. Note that this control command is terminated with a null byte. n denotes the line number for each tab. The valid entries for n are from 2 to the bottom line on the page, as specified by the form length setting. Send the values of n in ascending order. An out of order tab value is interpreted as a terminator.

ESC B clears all existing vertical tabs. Therefore, to add one tab, you must include all existing tabs, plus the new one. Use ESC B to set the tabs. Use the Vertical Tab control code, VT, to cause the printer to tab to each subsequent tab.

Example

REM SET VERTICAL TABS TO LINES 5 AND 10

LPRINT CHR$(27);"B";CHR$(5);CHR$(10);CHR$(0);

ESC R		Set Tabs to Power On Settings
ASCII:	ESC	R
Control:	CTRL [	R
Decimal:	27	82
Hexadecimal:	1B	52

Cancels all vertical and horizontal tab settings. Restores power-on horizontal tab settings (one tab stop every eight positions, starting at Column 9).