Epson 4100 manual Help, Status Print?, Menu Tree?, Non-Default List?

54 Configuration

10.5-in. increments, including A4 length of 11 2/3 in.

2"EMULATION" does not appear as a configuration menu option if "Lock Character Set and Emulation" is "On."

3"CHARACTER OPTIONS" does not appear as a configuration menu option if "Lock Character Set and Emulation" is "On."

4Only applies if the "Epson Character Set" is "Epson" in the FX-100 emulation.

5Only applies if the "Epson Character Set" is "IBM #1" in the FX-100 emulation.

6Only applies if the "Epson Character Set" is "IBM #2" in the FX-100 emulation.

7Only applies if the "IBM Character Set" is "IBM #1" in the Proprinter emulation.

8Only applies if the "IBM Character Set" is "IBM #2" in the Proprinter emulation.

9G0 is the default for "7 Bit DEC." G0 and G2 are the defaults for "8 Bit DEC." You can assign different graphic map defaults for 7-Bit and 8-Bit DEC.

The following sections explain, in greater detail, the various setting options within the printer’s configuration menu. Each option is listed in order under its respective menu heading.

HELP

Status Print?

Pressing YES prints out the present default settings, similar to the printout on Page 60.

Menu Tree?

Pressing YES prints out a profile of the configuration menu options. "EMULATION" and "CHARACTER OPTIONS" do not appear in the configuration menu tree if "Lock Character Set and Emulation" (Page 92) is "On."

Non-Default List?

Pressing YES prints out a list of the present default settings which differ from the original factory default settings.