Epson 4100 manual Esc N, Esc O

198Epson FX-100 Control Commands

•15.0 pitch: LM + 1 µ n µ 204

•16.67 pitch: LM + 1 µ n µ 226

•17.14 pitch: LM + 1 µ n µ 233

•18.2 pitch: LM + 1 µ n µ 247

where LM is the setting for the left margin. If n is greater that the upper limit, the command is ignored and the previous right margin setting remains in effect.

ESC N			Skip Over Perforation
ASCII:	ESC	N	(n)
Control:	CTRL [	N	(n)
Decimal:	27	78	(n)
Hexadecimal:	1B	4E	(n)

Sets the bottom margin to n number of lines. n must be from 1 to 127.

When the form length is changed by using the Length of Form by Lines command (ESC C) or the Length of Form in Inches Command (ESC C NUL), the bottom margin setting is cancelled. To regain the bottom margin setting, use ESC N following either ESC C or ESC C (NUL).

Example

REM SET FORM LENGTH TO 55 LINES AND RESET

REM BOTTOM MARGIN TO 3 LINES

LPRINT CHR$(27);"C";CHR$(55);

LPRINT CHR$(27);"N";CHR$(3);

ESC O		Cancel Skip Over Perforation
ASCII:	ESC	O
Control:	CTRL [	O
Decimal:	27	79
Hexadecimal:	1B	4F

Cancels the bottom margin setting set with ESC N.