Epson 4100 manual Paper Jam Detect, Paper Speed

Operator's Guide 75

Paper Jam Detect

Pressing YES prints out:

•Off

•On (factory default)

The printer uses a paper motion sensor on top of the left tractor to detect paper jams. If the paper is supposed to move but it does not, then the printer flashes the PAPER indicator and sounds the beeper.

Off: Disables paper jam detection.

On: Enables paper jam detection.

Paper Speed

Pressing YES prints out:

•11 in./sec (factory default)

•5 in./sec

This is often referred to as the slew rate.

11 in./sec: This the normal slew rate for single-part 18 lb paper.

5 in./sec: Consider using this slower slew rate for very light, heavy, or multipart paper. The slower slew rate is gentler on the paper's sprocket holes.