Epson 4100 manual N15 Control

308	DEC LA210 Control Commands
	ESC [ (n1) ; (n2) ; ...(n15) v							Set Multiple Vertical Tabs6
	ASCII:	ESC	[	(n1)	;	(n2)	;	...(n15)	v
	Control:	CTRL [	[	(n1)	;	(n2)	;	...(n15)	v
	Decimal:	27	91	(n1)	59	(n2)	59	...(n15)	118
	Hexadecimal:	1B	5B	(n1)	3B	(n2)	3B	...(n15)	76

Adds multiple vertical tabs at Columns n1, n2, etc. You may set up to a maximum of 15 vertical tabs with the use of one command. Vertical tabs are set at line numbers, not physical locations on the page.

ESC 4 or ESC [ 4 g				Clear All Vertical Tabs††
ASCII:	ESC	4
Control:	CTRL [	4
Decimal:	27	52
Hexadecimal:	1B	34
ASCII:	ESC	[	4	g
Control:	CTRL [	[	4	g
Decimal:	27	91	52	103
Hexadecimal:	1B	5b	34	67

Clears all previously set vertical tabs. Both control commands perform the same function.

VT Vertical Tab

ASCII: VT

Control: CTRL K

Decimal: 11

Hexadecimal: 0B

Causes the active line to advance to the next vertical tab on the current page. If there are no more vertical tabs on the current page, the active line is set at the top margin on the next page.

If Linefeed/Newline mode is enabled, the active column is also returned to the left margin.

6Changing line spacing also changes the physical position of tab stops.

These commands only set or clear the tabs. The vertical tab control code, VT, causes the active line to advance to subsequent tab positions.