Epson 4100 manual Epson Control Code Map, Epson Character Map

78 Configuration

#2. Although only one character set can be the default character set for the Epson emulation, you can assign a national-use character map or a code page default for each of the three.

Note: Do not confuse the IBM #1 and IBM #2 character sets available in the Epson emulation with those of the IBM emulation. The selections you make for the Epson emulation do not affect those of the IBM emulation, and vice versa.

Epson Control Code Map

Pressing YES prints out the present Epson control code map selection:

•Epson (factory default)

•IBM #1

•IBM #2

Epson: The U.S. Epson Character Set (Epson control code map + U.S. national-use character map) is shown on Page 39. Instead of the U.S. national-use character map, you can select one of 11 others under "Epson Character Map," Page 84.

IBM #1: The U.S. IBM #1 Character Set (IBM #1 control code map + U.S. national-use character map) is shown on Page 41. Instead of the U.S. national-use character map—IBM calls this Code Page 437—you can select the multilingual or Portuguese character map under "Epson IBM #1 Code Page," Page 84.

IBM #2: The U.S. IBM #2 Character Set is similar to the one shown on Page 41 except that Columns 8 and 9 contain characters rather than control codes. Instead of the U.S. national-use character map, you can select the multilingual, Portuguese, or Hebrew character map under "Epson IBM #2 Code Page," Page 84.

Epson Character Map