A-18 Appendix A—Specifications

Labels:

Label size and print area are shown in the following illustration.

 

 

 

 

(R) 0.079 in. (2 mm) min.

Label blank

Base

Label paper

With label No label

blank blank

The total thickness of label and base paper should not exceed 0.18 mm.

Label forms shall not be left in the printer.

The label adhesion should be so strong that no label comes off or partially separates from the base paper after a label form has been left in the printer for 72 hours at room temperature.

Feed labels only from the bottom.

The temperature range allowable for label printing is 40º F to 95º F (5º C to 35º C).

Page 346
Image 346
Epson 4100 manual Label blank Base Label paper With label No label Blank blank