122 Troubleshooting

To enter the hex dump mode, do one of the following:

Press and hold LINE FEED and FORM FEED and then turn on printer to place printer in 10 pitch hex dump mode.

The printer prints all transmissions from the host in hex dump format on 13.6-in. lines.

Press and hold ON LINE, LINE FEED, and FORM FEED and then turn on printer to place printer in 17.14 pitch hex dump mode.

The printer prints all transmissions from the host in hex dump format on 8-in. lines.

A hex dump shows both the hexadecimal value of all characters received by the printer and, where possible, also prints the character itself in the right-hand column. (See the example.) Unprintable characters are represented as a period (.).

To exit the hex dump mode, turn off printer.

Hex Dump Mode Printout (Example)

JB0-AL

Page 142
Image 142
Epson 4100 manual JB0-AL