Epson 4100 manual Character SET, Epson Enhanced Character Sets

D-38 Appendix D—Character Sets

THE CHARACTER SET

The character set is the result of selecting control code and character code maps. For example, in the configuration menu., if you select the IBM #2 control code map (Page D-13) and the IBM Multilingual Code Page 850 (Page D-26), you would have the character set shown on Pages D-40 and D-41.

To print out a copy of your active character set, see Page 34. See Page 37 through 39 for printouts of factory-default character sets.

EPSON ENHANCED CHARACTER SETS

Two Epson character map overlays can be used to map over some of the characters in the active Epson character set. These Epson character overlays (Pages D-42 and D-44) are chosen using control commands:

•ESC I (1) overlays portions of Columns 0, 1, 8, and 9 of the active Epson character set with printable characters. [Use ESC I (Ø) to remove the overlay.]

•ESC 6 overlays portions of Columns 8 and 9 of the active Epson character set with printable characters. (Use ESC 7 to remove the overlay.)

Use ESC I (1) together with ESC 6 to create the Epson National-Use Standard Code Page Character Set shown on Pages D-46 and D-47.