Epson 4100 manual Barcode Options, Barcode Strike, Barcode Density

86 Configuration

BARCODE OPTIONS

Pressing YES prints out the first of the barcode options listed below:

• Barcode Strike •

•Barcode Density

Barcode Strike

Pressing YES prints out the active setting:

•Double Strike (factory default)

•Single Strike

Double Strike: For barcodes, double strike is analogous to bold text. For this, the printhead carriage moves slightly to the right and reprints the same single-strike pattern.

Single Strike: For barcodes, single strike is analogous to normal text. The width of a single strike varies, depending on the barcode symbology. For more on this, see Appendix E.

Barcode Density

Pressing YES prints out the active setting:

•75 dpi (factory default)

•100 dpi

75 dpi: For barcodes, 75 dpi is analogous to draft quality mode. If the barcode reader successfully reads a low-density barcode, choosing the 75 dpi barcode density increases printer throughput. The 75 dpi setting may actually enhance readability.

100 dpi: For barcodes, 100 dots per in. is analogous to near letter quality mode. Use 100 dpi for USPS PostNet.