Operator's Guide 31

SWITCHING NLQ AND DRAFT

You can switch back-and-forth between near letter quality (NLQ) and draft quality print modes by pressing and holding ON LINE and then momentarily pressing NLQ:

+

In NLQ mode, the NLQ indicator lights. After switching modes you must press ON LINE to place printer on line.

You can also preselect a startup print mode in the configuration menu. This assures that the preferred print mode is automatically set after you turn on the printer. Draft print mode is the factory default startup print mode. If desired, see "Near Letter Quality," Page 72, in the Configuration section to change the startup print mode.

Once the printer is on, you can switch freely between NLQ and draft print modes using either the hot key explained above or, more commonly, by using a printer driver that matches your printer's present emulation. (See "Emulations and Printer Drivers" that follows.)

Page 53
Image 53
Epson 4100 manual Switching NLQ and Draft