Operator's Guide 33
CHANGING EMULATIONS
The factory default startup emulation is Epson FX-100, which means that
the printer acts like an Epson FX-100 printer after you turn on the power.
You can change the default startup emulation using the configuration
menu. The other two emulation selections are IBM Proprinter XL and
DEC LA210.
To change emulations, use a power-up or on-line hot key to enter the
configuration menu:
1. Either press FORM FEED and then turn on the printer;
+
or, with the printer already on, press and hold ON LINE and then
simultaneously press FORM FEED and LINE FEED.
+ +
The printer prints out:
HELP OPTIONS
2. Respond by pressing NEXT.
The printer prints out:
INTERFACE OPTIONS
•