Epson 4100 manual Operators Guide ESC K or PLD Advance Paper 1/12 Inch

		Operator's Guide 297
ESC K or PLD		Advance Paper 1/12 Inch
ASCII:	ESC	K
Control:	CTRL [	K
Decimal:	27	75
Hexadecimal:	1B	4B
ASCII:	PLD
Control:	not applicable
Decimal:	139
Hexadecimal:	8B

Performs a 1/12 in. paper feed. Linefeed/Newline mode does not affect this command. The active line is not modified. The next form feed is measured from the last active line, making

the next top of form reference inaccurate. Both commands perform the same function. Partial Line Down (PLD) is valid only if the upper data bytes have been enabled by selecting "8 Bit DEC" in the configuration menu and if the C1 control codes have been enabled using ESC SP 7.

LF Linefeed

ASCII: LF

Control: CTRL J

Decimal: 10

Hexadecimal: 0A

Advances the active line by one line. When the active line is advanced past the bottom margin and above the top margin, the active line is set to the next top margin.

If Linefeed/Newline mode is enabled, LF also returns the active column to the left margin. LF does not change the active column.