Furuno 1823C manual Specifications of Video Plotter GD-1900C

SPECIFICATIONS OF VIDEO PLOTTER GD-1900C

1	DISPLAY UNIT
1.1	Indication System	PPI Daylight display, raster scan, color LCD
1.2	Display	10.4-inch rectangular TFT color LCD, 640(H) x 480(V) dots
1.3	Input Data	IEC 61162-1 (NMEA 0183 Ver1.5/2.0)
	Own ship’s position:	GGA>RMC>RMA>GLL
	Ship’s speed:	RMC>RMA>VTG>VHW
	Bearing (True):	HDT>HDG*1>HDM*1>VHW
	Bearing (Magnetic):	HDM>HDG*1>HDT*1>VHW
	Course:	RMC>RMA>VTG
	Water depth:	DPT>DBT>DBS>DBK
	Wind:	MWV>VWT>VWR
	Water Temperature:	MTW
	Time:	ZDA
		*1: calculated by magnetic deviation
1.4	Output Data
	Alarm signal	12 VDC, 100 mA or less
	NMEA 0183 Ver1.5	GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
		RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
		DPT or DBT, DBS (ETR required), TTM (ARPA required)

2	PLOTTER FUNCTION
2.1	Projection	Mercator
2.2	Usable Area	85 latitude or below
2.3	Effective Area	211.2 x 158.4 mm
2.4	Display pixels	640 x 480 dots
2.5	Position Indication	Latitude/longitude, Loran C LOP or DECCA LOP

2.6Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)

2.7	Track Display	Plot interval: by time (1 sec. to 99 min. 59 sec.) or
		by distance (0 to 99.9 nm)
2.8	Colors	Red, yellow, green purple, light-blue, blue, white
2.9	Memory Capacity	Track/mark: 8000 points, Waypoint: 999 points
2.10	Storage Capacity	Simple route: 200 routes with 35 waypoints each
2.11	MOB	1 point
2.12	Quick Routes	1 course with 35 waypoints max.
2.13	Electronic Chart	FURUNO chart card or NAVIONICS chart card available
		C-MAP chart card also available for C-MAP NT Model
2.14	Alarms	Arrival and Anchor watch, Cross track error and proximity
		SP - 6	E3503S02H-M