Furuno 1823C Displaying target number ARP, TTM, Automatic acquisition area, ARP target number

2. RADAR OPERATION

6.Press the [MENU] key to close the menu. An acquisition area of 2.0 to 2.5 miles in range and ±45º on either side of the heading line in bearing appears.

Note: Targets being tracked in automatic acquisition are continuously tracked when switching to manual acquisition.

Automatic acquisition area

45° port

2.0 - 2.5 nm

45° starboard

Automatic acquisition area

2.26.3Displaying target number (ARP, TTM)

Target number can be shown for ARP and TTM targets as below.

3nm

12/LP H-UP

01

ARP

Target

Number

319.9° T TARGET

TRAIL

TLL

OUTPUT

ACQ

TARGET

INFO

RETURN

+ 359.9 ˚R 11.70nm

ARP target number

1.Press the [MENU] key.

2.Press the ARP SETUP soft key.

3.Select TARGET ID NUMBER.

4.Press the EDIT soft key.

5.Select ON or OFF as appropriate.

6.Press the ENTER soft key.

7.Press the [MENU] key to close the menu.

2-37