Furuno 1823C manual Rearranging data boxes, Temporarily erasing a data box

1. OPERATIONAL OVERVIEW

1.8.2Rearranging data boxes

You may select the location for data boxes as follows:

1.Using the trackball, place the cursor inside the data box you wish to move. As the cursor enters the box it changes to a hand. Push the [ENTER] knob, and the hand changes to a fist, meaning the box is correctly selected.

2.Use the trackball to move the data box to the location desired, then push the [ENTER] knob.

1.8.3Temporarily erasing a data box

If a data box is obscuring a desired object you may temporarily erase the box. Use the trackball to place the cursor inside the data box you wish to erase, then press the [CLEAR] key. To redisplay the box, press the D. BOX soft key twice to display it.

1-16