Furuno 1823C manual Features, Model Output Range Radar

Features

The 1800C/1900C series of radars and video plotters work within our new product-network system called the “NavNet.” Each product has an IP address to communicate with NavNet compatible products within the network, using TCP/IP protocol through an Ethernet 10BASE-T network.

The main features are as follows:

•The 1800C/1900C series of radars and video plotters consists of the following models:

Model	Output	Range	Radar
			Antenna
Marine Radar Model 1823C	2.2 kW	24 rpm	1.5 ft, Radome
Marine Radar Model 1833C	4 kW	36 nm	2 ft, Radome
Marine Radar Model 1933C	4 kW	48 nm	3.5 ft, Open
Marine Radar Model 1943C	6 kW	64 nm	4 ft, Open
Marine Radar Model 1953C	12 kW	72 nm	4/6 ft, Open
Color Video Plotter GD-1900C	—	—	—

•Bright 10.4” screen visible even under direct sunlight.

•User friendly operation with combination of discrete keys, soft keys, alphanumeric keys and trackball.

•Accepts FURUNO and Nav-charts™ (NAVIONICS) charts, or C-MAP NT/NT+ charts (C-MAP), depending on specification.

All names mentioned above are registered trademarks of their respective companies.

•Fast chart redraw.

•Built-in NavNet interface circuit board.

•Video input (video recorder, CCD device, etc.) available with installation of optional PIP Board.

•12-channel GPS Receiver GP-310B with highly accurate position fixing optionally available, GP-320B with WAAS capability.

•User programmable function keys.

•Video sounder picture available with connection of the optional Network Sounder ETR-6/10N or ETR-30N.

•Connected the optional facsimile receiver FAX-30 receives facsimile pictures and navtex messages transmitted from facsimile and navtex stations.

•Optional memory card interface unit CU-200.

x