Furuno 1823C manual General Setup, General setup menu

5.CUSTOMIZING YOUR UNIT

This chapter describes the various options which allow you to set up your unit to suit your needs. For mode-specific menus, e.g. radar, plotter and sounder, make sure that you select the appropriate display when making changes or viewing menu options.

5.1General Setup

This paragraph shows you how to set up functions common to the plotter, radar and sounder displays. This is done on the GENERAL SETUP menu, which you may display from any mode. These items include language, key beep, units of measurement, data sources, etc.

1.Press the [MENU] key to display the main menu.

2.Press the SYSTEM CONFIGURATION soft key.

3.Press the GENERAL SETUP soft key.

KEY BEEP	ON
LANGUAGE	ENGLISH
RANGE UNIT	nm, kt
TEMPERATURE UNIT	° F
DEPTH UNIT	ft
TEMPERATURE SOURCE	NMEA
DEPTH SOURCE	NMEA
RESET TRIP LOG	NO
SPEED SOURCE	NMEA

GENERAL SETUP1

EDIT

NEXT

PAGE

RETURN

LAT/LON DISPLAY	DD° MM.MMMM’
TD DISPLAY	LORAN C
SPEED	SOG
POSITION DISPLAY	LAT/LON
TIME DISPLAY	24 HOURS
INFRARED REMOTE MODE	A
RANGE & BEARING MODE	RHUMB LINE
BEARING READOUT	MAGNETIC
MAGNETIC VARIATION	AUTO 07.0° E

GENERAL SETUP2

EDIT

PREV.

PAGE

Page 1 Page 2

General setup menu

4.Press the NEXT PAGE or PREV. PAGE soft key to switch pages if necessary.

5.Use the trackball to select item.

6.Press the EDIT soft key.

7.Use the trackball to select option desired, then press the ENTER soft key.

8.Press the [MENU] key to close the menu.

5-1