Furuno 1823C manual 26.7 ARP, TTM target data, ARP target data

2. RADAR OPERATION

2.26.7ARP, TTM target data

You can show motion trends (range, bearing, course, speed, CPA and TCPA) for ARP or TTM targets. Note that TARGET ID NUMBER, in the ARP SETUP menu, must be turned on to display this data.

1.Place the cursor on the target whose data you want to see.

2.If not already displayed, press the [HIDE/SHOW] key to show the radar soft keys.

3.Press the TARGET and TARGET INFO soft keys. The data of the selected target appears at the bottom left-hand corner of the display. (If an EBL/VRM data box is displayed the ARP (TTM) data box will be under it.)

4.Press the RETURN soft key to finish.

5.To erase ARP/TTM target data, select the corresponding target with the cursor, then press the [CLEAR] key.

12/LP	3nm	319. 9	° T	TARGET
H-UP

TRAIL

Cursor

TLL

OUTPUT

ARP	ACQ
Target	01
	TARGET
	INFO

RETURN

No.01 VECTOR TRUE 15min	+ 359.9 ˚R
CSE 359.9˚T SPD 12.5kt
CPA 2.21nm TCPA 12:35	11.70nm

CPA and TCPA

Course and Speed

Target No., Vector Reference (True), Vector Time

ARP target data

2-41