7.MAINTENANCE, TROUBLESHOOTING

This chapter provides information necessary for keeping your unit in good working order and remedying simple problems.

WARNING

Do not open the equipment.

Hazardous voltage which can cause electrical shock exists inside the equipment. Only qualified personnel should work inside the equipment.

7.1Preventive Maintenance

Regular maintenance is important for optimum performance. A maintenance program should be established and should at least include the items shown in the table below.

Maintenance program

Item

Check point

Remedy

Display unit

Check for tight connection.

Tighten loosened connectors.

connectors

 

 

LCD

The LCD will, in time,

Wipe the LCD carefully to prevent scratching,

 

accumulate a coating of

using tissue paper and an LCD cleaner. To

 

dust which tends to dim

remove dirt or salt deposits, use an LCD

 

the picture. Wipe LCD

cleaner, wiping slowly with tissue paper so as

 

lightly with soft cloth to

to dissolve the dirt or salt. Change paper

 

remove dust.

frequently so the salt or dirt will not scratch

 

 

the LCD. Do not use solvents such as thinner,

 

 

acetone or benzene for cleaning.

Ground

Check for tight connection

Clean or replace ground wire as

terminal

and corrosion.

necessary.

7-1

Page 219
Image 219
Furuno 1823C manual Preventive Maintenance, Maintenance program, Check point Remedy