Furuno 1823C manual Alarm information, Plotter alarm menu

3. PLOTTER OPERATION

3.11.8Alarm information

When an alarm setting has been violated, the buzzer sounds and the speaker icon appears and is red. Press the [CLEAR] key to silence the alarm. You can see which alarm has been violated on the ALARM menu. In the example below the arrival alarm has been violated.

1.Press the [ALARM] key. The name of the offending alarm appears in the alarm information window.

	AUDIO ALARM	INTERNAL BUZZ
	ARRIVAL ALARM	ON 0.010nm
	ANCHOR WATCH ALARM	OFF 0.010nm
	PROXIMITY ALARM	OFF
	XTE ALARM	OFF 0.050nm
	SPEED ALARM	OFF
	TRIP ALARM	OFF 0000.0nm
	ALARM INFORMATION
Alarm information	ARRIVED
window	AT WAYPOINT XXX !

ALARM1

EDIT

CLEAR

ALARM

NEXT

PAGE

RETURN

Speaker icon

XXX = Destination waypoint name

Plotter alarm menu, page 1

2.Press the CLEAR ALARM soft key to acknowledge the alarm (and silence the buzzer if it was not done with the [CLEAR] key). The color of the speaker icon changes from red to background color. The icon remains on the screen until the cause of the alarm is eliminated or the alarm is disabled. If more than one alarm has been violated the message CONTINUE appears at the bottom of the alarm information window. In this case, press the NEXT INFO soft key to see which other alarms have been violated.

3.Press the [ALARM] key to finish.

Note: The alarm icon is red when an alarm setting is violated, and changes to background color when the [CLEAR] key or CLEAR ALARM soft key is pressed. The color does not change regardless of how many other alarms are violated.

3-58