Furuno 1823C manual GPS receiver setup Set equipped with GP-310B/320B

5. CUSTOMIZING YOUR UNIT

5.7.2GPS receiver setup (Set equipped with GP-310B/320B)

The GPS SETUP menu sets up the GPS Receiver GPS-310B/320B. Press the [MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft keys to display this menu.

LOCAL TIME OFFSET	+00:00
GEODETIC DATUM	WGS-84
POSITION SMOOTHING	000 second (s)
SPD/CSE SMOOTHING	005 second (s)
GPS SPEED AVERAGING	060 second (s)
LATITUDE OFFSET	0.000’N
LONGITUDE OFFSET	0.000’E
DISABLE SATELLITE	- - - - - -
LATITUDE	45° 35.000’N
LONGITUDE	125° 00.000’W
ANTENNA HEIGHT	005 m
GPS FIX MODE	2D/3D
COLD START	NO

GPS SETUP

EDIT

GPS

STATUS

WAAS

SET UP

RETURN

Appears only when GPS-320B is connected.

GPS setup menu

Contents of GPS setup menu

Item	Description	Settings
Local Time	GPS uses UTC time. If you would rather use	-13:30 to +13:30 hours
Offset	local time, enter the time difference between it
	and UTC. Use the +< - ->- soft key to switch from
	plus to minus and vice versa.
Geodetic Datum	Geodetic datum is a reference for geodetic	See Appendix for full list.
	survey measurements consisting of fixed latitude,
	longitude and azimuth values associated with a
	defined station of reference. You must have the
	correct geodetic datum selected in your plotter so
	that it will reference the correct point on the chart
	for a given latitude and longitude. Although
	WGS-84 is now the world standard, other
	categories of charts still exist. Refer to Appendix
	for a full list of geodetic datum.

(Con’t on next page)

5-22