Furuno 1823C manual Restarting navigation, Example of when to restart navigation, Log display

3. PLOTTER OPERATION

Restarting navigation

When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in Line 1 in the figure below. Also, if you don’t need to return to the original course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these cases, use the restart navigation function to restart navigation.

Line 2

Line 1

Obstacle

Original course

Example of when to restart navigation

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the LOG soft key.

TO Waypoint (WPT name in reverse video)

Passed waypoint (gray characters)

Estimated Time of Arrival at destination

Replaces triangle when selecting a route leg.

ETA 23:59 30. APR

0148° 18.290'N 007WPT 123° 14.286'W

	02	48° 17.341'N
▲	02
	005WPT	123° 10.232'W

0348° 20.261'N 003WPT 123° 11.658'W

0448° 19.862'N 006WPT 123° 04.190'W

LEG

90.0°

2.86nm

322.6°

3.08nm

75.2°

4.99nm

152.5°

19.87nm

LOG

RE-	Replaced by
START
	"FOLLOW LEG"
STOP	when selecting
	a route leg.

RVRSE

SPEED

COORD

TYPE

Log display

4.Use the trackball to select a waypoint or a route leg. When a route leg is selected the single arrow cursor is replaced by double arrows.

5.Press the RESTART soft key or FOLLOW LEG soft key in case of route leg.

Note: Navigation may be restarted from the plotter display, with the RESTART key, when a single quick point (QP<01>) is selected for navigation.

6. Press the [MENU] key to close the menu.

3-49