Furuno 1823C manual Terminating tracking of ARP targets, Terminating tracking of selected targets

2. RADAR OPERATION

2.26.4Terminating tracking of ARP targets

When ten targets have been acquired, no more acquisition occurs unless targets are cancelled. If you need to acquire additional targets, you must first cancel one or more individual targets, or all targets, using one of the procedures below.

Terminating tracking of selected targets

1.Place the cursor on the target to terminate tracking.

2.Press the [CLEAR] key to terminate tracking and erase the target.

Terminating tracking of all targets

1.Press the [MENU] key followed by the ARP SETUP soft key.

2.Select CANCEL ALL TARGETS.

3.Press the EDIT soft key.

CANCEL ALL TARGETS

§▲

°YES NO

▼

Cancel all targets window

4.Select YES.

5.Press the ENTER soft key.

6.Press the RETURN soft key followed by the [MENU] key to close the menu.

2-38