Furuno 1823C manual Settings description, Depth Info soft key

Depth info menu (C-MAP)

5. CUSTOMIZING YOUR UNIT

Contents of chart details menu for C-MAP (con’t from previous page)

Item	Description	Settings
DEPTH INFO	Bathymetric Line	Plotter/Overlay, Plotter, Off
soft key
	Spot Sounding	Plotter/Overlay, Plotter, Off
(See below.)
	Bottom Type	Plotter/Overlay, Plotter, Off
	Depth Area Limit	0-99999 ft (m, fa, P/B)
	Bathymetric Range	0-99999 ft (m, fa, P/B)

Settings description

Basic: Shows basic characteristics of objects.

Detailed: Shows detailed characteristics of objects.

Multiple: Shows multiple icons for complex objects.

Off: Turns item off.

On: Turns item on.

Plotter: Shows item on plotter display.

Plot/No Sector: Shows item on plotter display. Sector not shown.

Plotter/Contour: Shows contour on plotter display.

Plotter/Overlay: Shows item on plotter and overlay displays.

Single: Shows single icon for complex objects.

DEPTH INFO soft key		BATHYMETRIC LINE	PLOTTER/OVERLAY	DEPTH
				INFO
1.	Press the [MENU] key.	SPOT SOUNDING	PLOTTER/OVERLAY
		BOTTOM TYPE	PLOTTER/OVERLAY	EDIT
2.	Press the CHART SETUP and
		DEPTH AREA LIMIT	00020, 00164ft
	CHART DETAILS soft keys.	BATHYMETRIC RANGE 00000-00033ft
3.	Press the DEPTH INFO soft key.

Note: The bathymetric range setting allows you to control the color (Dark blue, light blue or white) associated to user assigned depths. Any contour line area that contains a depth that is LOWER than the first number will be shown in dark blue.

RETURN

Any contour line area that contains a depth

BETWEEN the first and second number will be shown as light blue. Any contour line area that contains a depth that is HIGHER than the second number will

be white. For example, if the bathymetric range setting is set to 00010~00050 ft, all contour areas that contain any depth less than 10 ft deep would be shaded dark blue, all depth contour areas that contain a depth between 10 and 50 feet will be shaded light blue, and all contour areas over 50 feet deep will be white.

5-17