Furuno 1823C manual Changing own ship track/mark distribution setting, Track memory window

3.PLOTTER OPERATION

4.Use the trackball to select digit and enter value with the alphanumeric keys. The CLEAR soft key functions to clear an entire line of data.

5.Push the [ENTER] knob or ENTER soft key.

6.Press the [MENU] key to close the menu.

3.6.5Changing own ship track/mark distribution setting

The equipment stores a total of 8000 points of track and marks. This amount may be distributed as desired, and the default setting is 2000 points of track and 6000 points for marks.

When you change the track memory setting, all tracks and marks in the memory are erased. If necessary save the data to a memory card. For further details see the paragraph “6.1.2 Saving data to a memory card.”

1.Press the [MENU] key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.

2.Use the trackball to select MEMORY (TRACK & MARK).

3.Press the EDIT soft key to display the track memory window.

TRACK MEMORY

2000/8000 POINTS

Track memory window

4.Use the trackball to select digit and use the alphanumeric keys to enter value.

5.Push the ENTER soft key or the [ENTER] knob. You are asked if you are sure to change the track memory capacity.

6.Push the [ENTER] knob.

7.Press the [MENU] key to close the menu.

3-22