Furuno 1823C manual How the anchor watch alarm works, Anchor watch alarm window

3. PLOTTER OPERATION

3.11.3Anchor watch alarm

The anchor watch alarm informs you that your boat is moving when it should be at rest. When the anchor watch is active, a red dashed circle with an “X” at its center marks the anchor watch area.

Alarm setting

Your ship's position where
you start the anchor watch	: Alarm
alarm.	area

How the anchor watch alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Use the trackball to select ANCHOR WATCH ALARM.

3.Press the EDIT soft key to open the anchor alarm window.

ANCHOR WATCH ALARM

▲°

§ON 0.010nm

OFF

▼

Anchor watch alarm window

4.Use the trackball to select ON.

5.Use the trackball and the alphanumeric keys to enter alarm setting: Operate the trackball to select digit; use the alphanumeric keys to enter value. The available anchor watch setting is 0.001 to 9.999 miles.

6.Press the ENTER soft key or push the [ENTER] knob to register setting.

7.Press the [ALARM] key to finish.

Note: If the arrival alarm range is changed, turn off the anchor watch alarm and then turn it on again to give priority to the anchor watch alarm.

3-54