Furuno 1823C manual Nav Data Display Setup, Nav data setup screen, Nav data setup window

5. CUSTOMIZING YOUR UNIT

5.8Nav Data Display Setup

The nav data display shows various navigation data, fed from a navigator, network equipment, etc. You may select the data to display and where to display it as follows:

1.Press the [MENU] key to open the main menu.

2.Press the SYSTEM CONFIGURATION, SYSTEM SETUP, HOT PAGE & NAV DISP SETUP and NAV DATA DISPLAY SETUP soft keys.

1	POSITION
2	WPT POS	3	SOG
4	STW	5	COG
6	BEARING	7	RANGE
8	DEPTH	9	TEMP

NAV DATA

EDIT

RETURN

Nav data setup screen

3.Use the trackball to select a location.

4.Press the EDIT soft key. The following display appears.

§DISPLAY DATA

POSITION

WPT POSITION

SOG

STW

COG

BEARING

RANGE

DEPTH

TEMPERATURE

LOG TRIP

TIME TO GO

ETA

DATE

TIME

°WIND

Nav data setup window

5.Select the data to display, then press the ENTER soft key or [ENTER] knob to register your selection.

6.Press the RETURN soft key followed by the [MENU] key to close the menu.

5-28