Furuno 1823C manual Plotter Function

	NMEA 0183 Ver1.5	GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
		RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
		DPT or DBT, DBS (ETR required),
		TLL (L/L, Heading data required), TTM (ARPA required)
5	PLOTTER FUNCTION
5.1	Projection	Mercator
5.2	Usable Area	85 latitude or below
5.3	Effective Area	211.2 x 158.4 mm
5.4	Display pixels	640 x 480 dots
5.5	Position Indication	Latitude/longitude, Loran C LOP or DECCA LOP

5.6Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)

5.7	Track Display	Plot interval: by time (1 sec. to 99 min. 59 sec.) or
		by distance (0 to 99.9 nm)
5.8	Colors	Red, yellow, green purple, light-blue, blue, white
5.9	Memory Capacity	Track/mark: 8000 points, Waypoint: 999 points
5.10	Storage Capacity	Simple route: 200 routes with 35 waypoints each
5.11	MOB	1 point
5.12	Quick Routes	1 course with 35 waypoints max.
5.13	Electronic Chart	FURUNO chart card or NAVIONICS chart card available
		C-MAP chart card also available for C-MAP NT Model
5.14	Alarms	Arrival and Anchor watch, Cross track error and proximity
		alarms, Ship’s speed in and out alarms, Water temperature,
		Trip alarm, Fish alarm, Bottom alarm (ETR required)

6 POWER SUPPLY

6.1Rated Voltage/Current

M1823C	12-24 VDC: (5.5-2.7 A)
M1833C	12-24 VDC: 5.3-2.6		A (6.4-3.1 A)
M1933C (24rpm)	12-24 VDC: 5.9-2.8 A (7.0-3.3 A)
M1933C (48rpm)	12-24 VDC: 7.5-3.6		A
M1943C (24rpm)	12-24	VDC: 6.6-3.2	A (7.7-3.6 A)
M1943C (48rpm)	12-24	VDC: 8.1-3.8	A
M1953C (24rpm)	12-24	VDC: (8.9-4.4 A)
M1953C (48rpm)	12-24	VDC: (10.3-5.1 A)
	( ): for high brilliance monitor
6.2 Rectifier (option)	100-115/220-230 VAC, 1 phase, 50/60 Hz

SP - 4	E3503S02J-M
	03/09/24