1-15
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 1 Cisco ONS 15310-MA SDH Shelf Assembly Hardware
Cable Description and Installation
Figure 1-11 BNC Insertion and Removal Tool
This tool can be obtained with P/N 227-T1000 from:
Amphenol USA (www.amphenol.com)
One Kennedy Drive
Danbury, CT 06810
Phone: 203 743-9272 Fax: 203 796-2032
This tool can be obtained with P/N RT-1L from:
Trompeter Electronics Inc. (www.trompeter.com)
31186 La Baya Drive
Westlake Village, CA 91362-4047
Phone: 800 982-2629 Fax: 818 706-1040
1.8.4 E1 Cable Installation
The ONS 15310-MA SDH uses 64-pin Champ connector cabling for E1 connections.
Table 1-2 lists the Champ connector pin assignments and the corresponding EIA connector mapping for
connectors J8 and J9 on the EIA installed on the A side, and connectors J21 and J22 on the EIA installed
on the B side.
44552
Table 1-2 Champ Connector Pin Assignments—Side-A EIA, Connectors J8 and J9; Side-B EIA,
Connectors J21 and J22
Signal Pin Signal Pin
Ring Port 1 1 Tip Port 1 33
Ring Port 2 2 Tip Port 2 34
Ring Port 3 3 Tip Port 3 35
Ring Port 4 4 Tip Port 4 36
Ring Port 5 5 Tip Port 5 37
Ring Port 6 6 Tip Port 6 38
Ring Port 7 7 Tip Port 7 39
Ring Port 8 8 Tip Port 8 40
Ring Port 9 9 Tip Port 9 41
Ring Port 10 10 Tip Port 10 42
Ring Port 11 11 Tip Port 11 43
Ring Port 12 12 Tip Port 12 44
Ring Port 13 13 Tip Port 13 45
Ring Port 14 14 Tip Port 14 46
Ring Port 15 15 Tip Port 15 47