4-7
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 4 Cisco Transport Controller Operation
CTC Window
network for more recent versions of the software. (For more information about the automatic
download of the latest CTC JAR files, see the “4.1.2 CTC Software Installed on the PC or UNIX
Workstation” section on page 4-2.)
• The Disable Circuit Management option omits the discovery of circuits. To view circuits
immediately after logging in, make sure that Disable Circuit Management is not checked. However,
if disabled, after you have logged in you can click the Circuits tab and CTC will give you the option
to enable circuit management.
These options are useful if you want to log in to a node to perform a single task, such as placing a card
in or out of service, and do not want to wait while CTC discovers DCC connections and circuits.
4.6 CTC Window
The CTC window ( Figure 4-2) appears after you log into an ONS 15310-MA SDH. The CTC window
includes a menu bar, toolbar, and a top and bottom pane. The top pane provides status information about
the selected objects and a graphic of the current view. The bottom pane provides tabs and subtabs to view
ONS 15310-MA SDH information and perform provisioning and maintenance. The CTC window
provides three views: network, node, and card.
Figure 4-2 ONS 15310-MA SDH Node View (Default Login View)
159513
Menu bar
Top pane
Tool bar
Status area
Graphic area
Tabs
Status bar
Subtabs Bottom pane