Cisco Systems 15310-MA manual 11-31

Chapter 11 Performance Monitoring

Performance Monitoring for Optical Ports

4.Far-end high-order VC4 and VC4-Xc path PM parameters applies only to the STM1-4 card. Also, MRC-12 and OC192/STM64-XFP based cards support far-end path PM parameters. All other optical cards do not support far-end path PM parameters.

5.SDH path PM parameters do not increment unless IPPM is enabled. See the 11.2 Intermediate-Path Performance Monitoring section.

Note For information about troubleshooting Linear Multiplex Section Protection switch counts, refer to the Cisco ONS 15310-MA SDH Troubleshooting Guide. For information about creating circuits that perform

aswitch, refer to the Cisco ONS 15310-MA SDH Procedure Guide.

	Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01		11-31