Cisco Systems 15310-MA manual Current Service State Action Next Service State

Appendix B Administrative and Service States

Service State Transitions

Table B-5	ONS 15310-MA SDH Port and Cross-Connect Service State
	Transitions (continued)
Current Service State		Action	Next Service State
locked-enabled,disabled		Put the port or cross-connect in	unlocked-enabled
		the unlocked administrative
		state.
		Put the port or cross-connect in	locked-disabled,Automatic In
		the Automatic In Service	Service
		administrative state.
		Put the port or cross-connect in	locked-enabled,maintenance
		the locked, maintenance.
		Put the VCAT cross-connect in	locked-enabled,maintenance &
		the locked, outOfGroup	outOfGroup
		administrative state.
		Put the VCAT cross-connect in	locked-enabled,maintenance &
		the locked, outOfGroup	outOfGroup
		administrative state.
locked-enabled,loopback &		Release the loopback.	locked-enabled,maintenance
maintenance		Note While in
		locked-enabled,loopbac
		k & maintenance, both
		Cisco Transport
		Controller (CTC) and
		Transaction Language
		One (TL1) allow a
		cross-connect to be
		deleted, which also
		removes the loopback.
		This applies only to the
		cross-connect, not the
		ports.
		Alarm/condition is raised.	locked-disabled,FLT & loopback
			& maintenance
			locked-disabled,FLT & loopback
			& maintenance & outOfGroup
			for a VCAT cross-connect
locked-enabled,loopback &		Alarm/condition is raised.	locked-disabled,FLT & loopback
maintenance & outOfGroup			& maintenance & outOfGroup

Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2

B-12 78-19417-01