Sonance Specifications, Technical Assistance, Obtaining Service, AVC100R/AVC100SL, AVCDWP2

SPECIFICATIONS

AVC100R/AVC100SL

DESCRIPTION:	Local, full-bandwidth, 2-channel distribution ampli-
	fier with rotary (AVC100R) or slider (AVC100SL) vol-
	ume control; fits standard single-gang plaster ring.
POWER OUTPUT:	Continuously-variable from 0 to 7.5 watts (rms) per
	channel into a nominal 8-ohm load.
FREQUENCY RESPONSE:	20 Hz ~ 20 kHz
INPUT CONNECTIONS:	(4)	Quick-Disconnects; Left, Right, GND, +24 Vdc.
LOOP CONNECTIONS:	(4)	Quick-Disconnects; Left, Right, GND, +24 Vdc.
SPEAKER CONNECTIONS:	(4)	Quick-Disconnects; Left +, Left –, Right +, and
	Right –. Load is 4 ohms per channel, minimum.
STEREO/MONO MODES:	Selectable via internal jumper.
FUSE:	Internal; type AGC, 1 A, 250 V.
DIMENSIONS:	4-3⁄32" H X 1-5⁄8" W X 4-1/4" D (overall)
	2-3⁄4" H X 1-5⁄8" W X 3-3⁄8" D (in-wall)

AVCDWP2

DESCRIPTION:	Stereo driver amplifier connects to hi-fi stereo
	source and up to 100 AVC100R/SLs; fits standard
	single-gang plaster ring.
INPUT CONNECTIONS:	(2) color-coded, stereo RCA jacks; 50 kΩ input
	impedance.
OUTPUT CONNECTIONS:	(3) sets of (4) Quick-Disconnects: Left, Right, GND,
	and +24 Vdc.
FREQUENCY RESPONSE:	20 Hz ~ 20 kHz
POWER CONNECTIONS:	Female, 2.1 mm, mini-plug connects to
	recommended power supply.
GAIN CONTROL:	(2) L/R trim pots provide +19 dB adjustment range.
FUSE:	Internal; type AGC, 0.5 A, 250 V.
DIMENSIONS:	4-3⁄32" H X 1-5⁄8" W X 3-5/8" D (overall)
	2-3⁄4" H X 1-5⁄8" W X 3-3/8" D (in-wall)

Minimum Recommended Power Supply Specifications

Description:	+24 Vdc, 2.5 A, voltage-regulated switching power
	supply with short-circuit protection; for use with up
	to six (6) AVC100R/SLs.
CURRENT DRAW:	1.5 A maximum at 50 watt rating
AC CONNECTIONS:	110 Vac male IEC plug with supplied power cable
	connects to standard 110 Vac outlet. Multi-voltage
	input auto-switches from 110~240 Vac (50 ~60 Hz)
	for use in Europe or Australia.
DC CONNECTIONS:	6' attached cable with male, 2.1 mm, mini-plug for
	connection to AVCDWP2.
Marked:	UL Listed “Class 2”

Declaration of Conformity

We, Sonance

212 Avenida Fabricante

San Clemente, CA 92672

U.S.A.

declare in own responsibility, that the products described in this owner’s manual is in compliance with technical standards:

EN 60065 : 1994

EN 55013 : 1990

EN 50082 : 1992

	Sonance
7/00	San Clemente, CA	U.S.A.

TECHNICAL ASSISTANCE

If you any have questions about the operation or installation of your Sonance AVC system products, please call our Technical Assistance Department on any business day at:

(800) 582-0772 or (949) 492-7777; between 9 A.M.and 5 P.M.,PST

OBTAINING SERVICE

If your product should need repair or service,contact your authorized Sonance dealer for help.

WARRANTY COVERAGE (USA ONLY)

Sonance offers you a one (1) year limited warranty on each of your AVC products.You must observe the following conditions in order to receive this protection:

1.Retain your bill of sale or legible facsimile (photocopy).If your unit(s) should ever require service, the bill of sale shall act as your proof of ownership and give the effective date of your warranty.

2.Read the below warranty thoroughly.Sonance offers you certain rights outlined in your warranty and requires specific conditions to be met.You may also have other rights which vary from state to state.

One-Year Limited Warranty

Sonance warrants to the original purchaser for the period of one (1) year,eachAVC unit to be free from defects in material and workmanship provided each unit is operated in accordance with the printed instructions included with the unit.One (1) year begins on the date of purchase shown on the bill of sale (receipt).

For this warranty to be effective,the bill of sale must also show from whom each unit was purchased and the purchase price. In the event proof of purchase cannot be established as stated in the previous sentence(s),warranty shall commence on the date each unitwas shippedfrom the factory,providedthe serial number on each unithasnot been altered or in any way tampered with. This warranty shall apply exclusively to the original purchaser and shall not apply to purchasers who purchased units solely for industrial or commercial purposes.

During the warranty period, Sonance agrees to repair or, at its discretion, replace at no charge components that prove to be defective, provided a unit is returned in accordance with the shipping instructions found within the product installation instructions/owner’s manual. This warranty does not apply if a unit has been damaged by accident or misuse, or as a result of service or modification by unauthorized personnel.

This warranty is limited to Sonance product(s) registered herein and specifically excludes any damage to loudspeakers and other allied or associated equipment which may result for any reason from use with this product.

The warranty set forth above is in lieu of all other warranties, express or implied, of merchantability,fitness for a particular purpose or otherwise.Inno event shall Sonance be liable for incidental or consequential damages or have any liability with respect to defects other than as specifically set forth above.

212 Avenida Fabricante • San Clemente, CA 92672-7531, USA • (800)582-7777 or(949)492-7777 • FAX: (949)361-5151 • Technical Support: (800) 582-0772