1-26
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 1 Cisco ONS 15310-MA SDH Shelf Assembly Hardware
Cards and Slots
Figure 1-14 RJ-11 Cable Connector
1.11 Cards and Slots
Caution Always use the supplied ESD wristband when working with a powered ONS 15310-MA SDH. For
detailed instructions on how to wear the ESD wristband, refer to the Cisco ONS Electrostatic Discharge
(ESD) and Grounding Guide.
The ONS 15310-MA SDH has six card slots. Slots 3 and 4 are dedicated to the common-control
(15310E-CTX-K9) cards. Slots 1, 2, 5, and 6 can accommodate the following traffic cards:
Ethernet: CE-100T-8 card, ML-100T-8, CE-MR-6 card
Electrical: E1_21_E3_DS3_3 card, E1_63_E3_DS3_3 card
These cards have plugs at the rear of the card. When the ejectors are fully closed, the card plugs into the
assembly backplane.
When no card is installed in a card slot, a filler card should be installed. Use a 15310E-CTX-K9 filler
card in empty 15310E-CTX-K9 slots (Slots 3 and 4), and an expansion filler card in empty traffic card
slots (Slots 1, 2, 5, and 6).
61077
Pin 1 Pin 6
RJ-11