C-3
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Appendix C Network Element Defaults
Cisco ONS 15310-MA SDH Card Default Settings
Note When the card level defaults are changed, the new provisioning done after the defaults have changed is
affected. Existing provisioning remains unaffected.
The following types of defaults are defined for Cisco ONS 15310-MA SDH cards.
C.3.1 Configuration Defaults
Most card-level and port-level configuration defaults correspond to settings found in the CTC card-level
Provisioning tabs.
Note The full set of ALS configuration defaults can be found in the CTC card-level Maintenance > Optical >
ALS tabs for supported cards. ALS defaults are supported for PPM (SFP) STMN ports on the
15310E-CTX-K9 card.
Note ML-100T-8 console port access and RADIUS server access defaults can be found in the CTC card-level
IOS tab for ML-100T-8 cards.
Configuration defaults that correspond to settings that are reachable from the CTC card-level
Provisioning tabs (except as noted) include the following types of options (arranged by CTC subtab):
• Broadband Ports—(E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards only) Set the BBE port rate as
DS3, E3, or unassigned (DS3 is the default).
• E1—(E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards only) E1 rate port-level line configuration
settings.
• DS3—(E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards only) DS3 rate port-level line configuration
settings.
• Pluggable Port Modules—(15310E-CTX-K9 cards only) PPM (SFP) slot and port rate configuration
settings.
• Optical—(15310E-CTX-K9 cards only) STMN rate port-level line configuration and SDH VC
high-order path settings.
• ALS (card-level Maintenance > Optical > ALS tab)—(15310E-CTX-K9 cards only) PPM (SFP)
STMN port ALS configuration defaults.
• IOS (card-level IOS tab)—(ML-100T-8 cards only) Console port and RADIUS server access
settings.
• Ether Ports—(CE-100T-8 cards only) Line configuration settings (including IEEE 802.1p CoS and
IP ToS).
• POS Ports—(CE-100T-8 cards only) Line configuration settings.
Note Line configuration defaults for the CE-100T-8 apply to both Ethernet port and POS port settings, where
the same setting exists for both.