Cisco Systems 15310-MA 4.6.1.2 Node View Card Shortcuts, 4.6.1.3 Node View Tabs

4-10
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 4 Cisco Transport Controller Operation
CTC Window
Figure 4-4 Facility Loopback Indicator
Table 4-5 lists the card statuses.
4.6.1.2 Node View Card Shortcuts
If you move your mouse over cards in the graphic, popups display additional information about the card
including the card type; card status (active or standby); the type of alarm, such as Critical, Major, and
Minor (if any); and the alarm profile used by the card. Right-click a card to reveal a shortcut menu, which
you can use to open, reset, or delete the card. Right-click a card slot to preprovision it before installing
the card.
4.6.1.3 Node View Tabs
Table 4-6 lists the tabs and subtabs available in the node view.
Table 4-5 Node View Card Statuses
Card Status Description
Stby Card is in standby.
Act Card is active.
NP Card is not present.
Mis Card is mismatched.
Ldg Card is resetting.
Table 4-6 Node View Tabs and Subtabs
Tab Description Subtabs
Alarms Lists current alarms (CR, MJ, MN) for the
node and updates them in real time.
—
Conditions Displays a list of standing conditions on the
node.
—
History Provides a history of node alarms including
date, type, and severity of each alarm. The
Session subtab displays alarms and events for
the current session. The Node subtab displays
alarms and events retrieved from a fixed-size
log on the node.
Session, Node
Circuits Creates, deletes, edits, and maps circuits. Circuits, Rolls
Provisioning Provisions the ONS 15310-MA SDH node. General, Network, OSI, Protection,
Security, SNMP, Comm Channels,
Timing, Alarm Extenders, Alarm
Profiles, Defaults