Cisco Systems 15310-MA 1.4 Front Door

1-6
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 1 Cisco ONS 15310-MA SDH Shelf Assembly Hardware
Front Door
Figure 1-3 High-Density EIA Connectors
To install the EIA on the rear of the shelf assembly, you must first remove the standard sheet metal
covers. The EIAs use the same screw holes as the standard sheet metal covers, but they use three holes
for panhead screws and two holes for jack screws.
When installed with the standard door and cabling on the backplane, the ONS 15310-MA SDH shelf
measures approximately 13.7 inches (34.8 cm) deep when fully populated with backplane cables.
1.4 Front Door
The ONS 15310-MA SDH is orderable with a front door. You must install the ground strap on the door
after you install the door (Figure 1-4).
271766
E1
OUT
J8
E1
IN
J9
E1
OUT
J10
E1
IN
J11
E1
OUT
J12
E1
IN
J13
J20-HD DS3
132
PWR AJ6-ALM INPUT
J15-IN J16-OUT J17-IN
J14-OUT J18-OUT J19-IN
PID VID S/N BAR CODE CLEI CODE
P/N
COO
-48VDC RTN
E1
OUT
J21
E1
IN
J22
E1
OUT
J23
E1
IN
J24
E1
OUT
J25
E1
IN
J26
J33-HD DS3
312
PWR B J1-LAN
J31-OUTJ30-INJ29-OUT
J32-INJ28-INJ27-OUT
PID VIDS/NCLEI CODEBAR CODE
P/N
COO
J2-CRFT J3-UDC J4-BITS1RTN -48VDC
J5-BITS2 J7-ALM OUT